fbpx

EPDM Membrane – Pond Liners

EPDM geo membrane stands for Ethylene Propylene Diene Monomer and is a synthetic rubber.

As EPDM rubber is specially made for the roof and underground market, it is very resistant to the effects of aging. EPDM naturally resistant to UV and radiation ozone and other meteorological influences (with temperature differences), it is also known for its wide and lasting flexibility. This allows the sheet to absorb stresses and always adapt to changing climatic conditions, no support or reinforcement in the base is required.

Can Order Custom Sizes

Interested in Private Label?

EPDM Membrane – Pond Liners can be supplied in YOUR OWN BRAND.

Find out more

More Details

Roofing Membrane

These membranes can be applied on the roofs to protect them from water leakages and attack of chemicals and vapors. The EPDM Membranes are single-ply waterproofing membranes which make the surface watertight and are resistant to ozone and UV light. EPDM Roofing Membranes are easy to install and serves as best choice for a long lasting, fit and forget, waterproofing and roofing solution.

EPDM as Pond Liners

Pond Liners are manufactured using Ethylene Propylene Diene Monomer (EPDM) rubber and are used in artificial lakes, ponds and other water bodies. Our pond liners can be used in ponds made for recreational and commercial purposes, as well as in industrial reservoirs.

There are areas where water is scarcely available and storing it in proper hygienic conditions is a challenge, Alternate ways to store water may turn out to be an expensive proposition and is also time consuming. Pond Liners can be used to store water for extended period of time. It is as simple as, excavating the ground, laying the Pond Liners and filling/ storing water.

Our pond liners can be used for various applications such as reservoirs, canals, artificial lakes and golf course. The pond liners are flexible in nature, and hence can take the shape of the water body. Our pond liners are formulated to be friendly with aquatic life, however it is recommended to get it tested for a specific purpose before use, as per the rules and regulations of the local governing authorities. Our pond liners conform to globally accepted ASTM product standards and meet the requirement FDA CFR 21.

Our pond liners are used in various industries like Dam Liner, Swimming Pool Liner, Landfill Liners, Fish Pond Liner, Flexible Pond Liners, Aquaculture Pond Liners, Fish Farm Pond Liners, Geomembrane Pond Liners, Aquaponics.

The lakes, ponds, reservoirs, etc at times cover a large area. We manufacture EPDM pond liners / EPDM Rubber Sheet with a width of 15 meter with factory seam, and even more upon request. The wider width of the membranes reduces the number of joints and overlaps carried out during the installation. The fewer joints and overlaps not only make the liner easy to install, but it also considerably reduces the risk of the liner failing due to improper overlaps and joints during installation on site. The fewer overlaps and joints also reduce labour costs and installation time.

EPDM Pond Liner available thickness

EPDM PondLine 100 = 1 mm
EPDM PondLine 120 = 1.2 mm
EPDM PondLine 150 = 1.5 mm
EPDM PondLine 200 = 2.0 mm

 

EPDM Pond Liner Heat Sealed, Standard Sizes

(width x length)

1.5 m x 20 m
3.0 m x 30 m
4.5 m x 30 m
6.0 m x 30 m
7.5 m x 30 m
9.0 m x 30 m
10.5 m x 30 m
12.0 m x 30 m
13.5 m x 30 m
15.0 m x 30 m

Technical Data Sheets & MSDS

No document available

Request More info on EPDM Membrane – Pond Liners

*We don't carry stock of all products. Please call 093910200 to check stock availability, minimum order quantity and lead time.

find a Product

Looking for products in private label

MERZ Construction Products works with several international manufacturers who are leaders in their respective industries and market their products to leading building products manufacturers, suppliers & distributors in Australia, New Zealand, Malaysia, Singapore, Thailand and Middle East.

find out more